RO Pure Water Treatment is the most precise membrane liquid separation technology. The operating pressure is applied on the side of the inlet water and the concentrated solution to overcome the natural osmotic pressure.
When the operating pressure higher than the natural osmotic pressure is dropped on the side of the concentrated solution water molecules naturally permeate the flow The direction will be reversed, and the water molecules in the influent concentrated solution pass through the reverse osmosis membrane to become the purified water om the dilute solution side Reverse osmosis suitable equipment can block all soluble salts and organic substances with a molecular weight greater than 100. but allow water molecules to pass through, The salt rejection rate of reverse osmosis composite membranes is generally greater than 98%.
RO Tractament d'aigua pura
Most of our projects use DOW Filmtec, Toray, Vontron, Hydranautics, LG brands. They are well-known brands in the water treatment industry.
The reverse osmosis membrane is the core element to realize reverse osmosis, and it is an artificial semipermeable membrane with certain characteristics made by simulating biological semipermeable membrane. Generally made of polymer materials. Such as cellulose acetate film, aromatic polyhydrazide film, aromatic polyamide film. The diameter of the surface pores is generally between 0.5 and 10 nm, and the permeability is related to the chemical structure of the membrane itself. Some polymer materials have good repellency to salt, but the permeation speed of water is not good. The chemical structure of some polymer materials has more hydrophilic groups, so the permeation speed of water is relatively fast. Therefore, a satisfactory reverse osmosis membrane should have an appropriate amount of permeation or salt rejection.
Additionally, commercial RO water treatment systems can incorporate chemicals such as anti-scaling (scaling inhibitors), anti-fouling, pH adjustment, sterilization and disinfection chemicals in the pre- or post-treatment. We keep a close eye on the water treatment industry and add new water technologies to our reverse osmosis water plants.
When checking the customer's water quality analysis report, sometimes due to scaling and scaling problems, we can use the CIP (cleaning-in-place) system to clean the membrane in the membrane shell to make the membrane longer life. It is a new type of water treatment technology most used in the water treatment industry.
Potència elèctrica dels sistemes comercials de tractament d'aigua RO
Per a plantes de purificació d'aigua comercial necessita 220-380V / 50Hz / 60Hz. Per a una major capacitat, especialment per al sistema industrial d'osmosi inversa, a causa de la bomba d'alta pressió, necessita 380V 50/60Hz. Pel que fa al disseny de la vostra màquina comercial de filtració d'aigua d'osmosi inversa, comprovarem el vostre subministrament elèctric i decidirem fixar-vos la potència. A més, tenim alguns mètodes d'estalvi d'energia per reduir el cost elèctric, les noves tecnologies de tractament d'aigua Chunke l'ajuden a reduir el seu major cost per al funcionament del sistema.
Abans de comprar el sistema de potabilització d'aigua comercial, vostè ha de saber:
1. Capacitat de producció d'aigua pura (L/dia, L/hora, GPD).
2. Feed Water TDS i Raw Water Analysis Report (prevenir problemes d'embrutiment i escalat)
3. El ferro i el manganès s'han d'eliminar abans que l'aigua crua entri a la membrana de filtració d'aigua d'osmosi inversa
4. El TSS (sòlid total en suspensió) s'ha d'eliminar abans de la membrana del sistema de potabilització d'aigua comercial.
5. IDE (Índex de densitat de llims) ha de ser inferior a 3
6. Ha d'assegurar-se que la seva font d'aigua no té oli i greix
7. El clor s'ha d'eliminar abans del sistema comercial de tractament d'aigua
8. Tensió i fase de potència elèctrica disponible
9. Disposició del lloc per al sistema d'osmosi inversa comercialEspecificació d'operació per a sistemes comercials de tractament d'aigua RO
TDS d'aigua d'alimentació: 0 - 1000ppm
|
Duresa superior a 18ppm Necessita dosificació antiescalant
|
La terbolesa ha de ser
Eliminat
|
Temperatura màxima de l'aigua d'alimentació: 42 °C
|
Operar amb resultats de TDS més baixos
Recuperació
|
H2S ha de ser
Eliminat
|
Tolerància al pH: 3-11
|
Contingut màxim de ferro: 0.05ppm
|
|
Pressió de l'aigua d'alimentació: 1,5 a 6 bar
|
Tolerància màxima de sílice: 60ppm
|
|
Contact us to learn more about our industrial reverse osmosis systems and commercial RO water plants. Our sales team and technical team will be happy to share new water treatment technologies for your project.